Cactus Mechanical, Inc.
Home Company Services Products Contact Us
York
Trane
     Residential
     Commercial
MasterCool
 
 
Cactus Mechanical, Inc.
2038 W. Ironwood Drive
Phoenix, AZ 85021-1919
Office:
 602 866-1200
Fax:
 602 216-9676
Commercial License:
 ROC-79638
Residential License:
 ROC-78838
   
Products Trane Commercial Split System Heat Pumps

Trane Split System Heat Pumps

With conventional split system heat pumps the air moving fan and cooling-heating coil are located in an indoor module called an air handler.

The compressor and condenser (outdoor) fan are located in a weatherproof enclosure located outdoors. Conventional split system heat pumps utilize electricity to drive the compressor, condenser (outdoor) fan and evaporator (indoor) fan to produce both heating and cooling modes of operation. A supplementary electric resistance heat strip may also be employed on the air handler module to assist heating operation at lower ambient temperatures and to maintain warm air flow into a building or home when the outdoor heat pump section enters "defrost" mode to de-ice the condenser (outdoor) coil. These systems range in sizes from 1˝ - 20 nominal tons cooling capacity.
1˝, 2, 2˝, 3, 3˝, 4, 5 Ton XE 1200 (TWP) - Split System Heat Pump
High efficiency Trane Climatuff® compressor.
Solid-state electronic defrost system.
Braze refrigerant connections.
Multi-use service valves.
Steel cabinet, full coil protection.
Powder paint covers uniformly to resist rust and corrosion.
Attractive silver gray color.
Top cover/motor mount/grille combined.
Fast draining base pan assembly.
Compressor crankcase heat provided.
Liquid line filter-drier.
Single side service access.
Low ambient cooling to 40 F with accessory AY28X084.
Built-in start kit.
SEER up to 13.00, HSPF up to 8.50
Climatuff® compressor (one)
Spine Fin™ aluminum outdoor coil
Electronic demand defrost system
1, 1˝, 2, 2˝, 3, 3˝, 4, 5 Ton XE 1000 (TWR) - Split System Heat Pump
SEER's in the 10.00 range, HSPF's in the 7.00 range
Brazed refrigerant piping connections
Electronic defrost system
Utilizes Trane Climatuff® compressor (one) for high reliability and long life
ARI 240/270 certification of capacity and performance
UL certified to meet independent agency certification
Vertical upflow condenser discharge
Spine-Fin(TM) all aluminum condenser heat transfer for high efficiency to reduce energy consumption
Unique powder paint for superior cabinet appearance and weather protection
Single side service access
 
2˝, 3, 3˝, 4, 5, 6 Ton (TWA) - Split System Heat Pump - 3 Phase
SEER/EER up to 8.5/9.2, HSPF's in the 6.0-7.0 range
Brazed refrigerant piping connections
Climatuff® compressor
Outdoor temperature sensor
Switch-over valve
Spine Fin™ outdoor coil
Internal high pressure protection
Internal overload protection
Refrigerant line filter-drier factory installed
Compressor sump heat
Attractive weather resistant cabinet
Outside pressure taps for refrigerant check
Magnetic contactor
Operating charge of HCFC-22
Electronic demand defrost control
Expansion valve
Centralized refrigerant control box
Service valves
Low ambient cooling to 55ºF as manufactured
Low ambient cooling to 40ºF with accessory AY28X084
5-year compressor warranty
Optional extended warranties
Odyssey™ 7˝ - 20 Ton Split System Products
This line of split-system units ranges from 7½ through 20 tons. This factory-assembled product is available in split system condensing units, heat pumps, and air handlers.

Typical Applications:
Low-rise buildings, manufacturing/distribution facilities, and retail outlets.

HOME     COMPANY     SERVICES     PRODUCTS     CONTACT US
COMMERCIAL LICENSE ROC--79638          © 2004 CACTUSMECHANICAL.COM          RESIDENTIAL LICENSE ROC--78838